| MS DOG2 series dual axis for ±90° |
| Measurement Specialties DOG2 series dual axis, range ±90°, Vcc +8… 30VDC, output voltage +0.5…+4.5V |
| Order Code:G-NSDOG2-003 |
 | Description: 1 Axis
The single axis inclinometer is mainly developed for vehicle and tool position monitoring. A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital signal processing including temperature compensation. The integrated filter improves performance and allows a use of the sensor in many noisy environments (e.g. vibrations).
Typical Applications:
- Platform leveling
- Truck and off-road vehicle cabin or tool leveling
- Crane boom leveling
- Tilt alarm, e.g. digger
- Antenna leveling
- Inclination dependent engine control
Features:
- 8-30V supply voltage (5V on request)
- ±180° single axis
- Digital signal processing includes
- filter (e.g. vibration damping)
- temperature compensation
- 12 bit resolution
- High refresh rate
- -40°C to +85°C temperature range
- Accuracy typically better than
- 0.2° at +25°C
- 0.6° (-40°C to +85°C)
Description: 2 Axis
The Dual Axis Inclinometer is mainly developed with focus on platform leveling, dynamic engine management, tip-over protection and tilt alarm. A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital signal processing including temperature compensation. The integrated filter improves performance and allows to use the sensor in many noisy environments (e.g. vibrations).
Typical Applications:
- Platform leveling
- Truck and off-road vehicle cabin or tool leveling
- Crane boom leveling
- Tilt alarm, e.g. digger
- Antenna leveling
- Inclination dependent engine control
- Solar panel elevation control
Features
- 8-30V supply voltage (5V on request)
- Digital signal processing includes
- filter (e.g. vibration damping)
- temperature compensation
- 12 bit resolution
- up to 100Hz refresh rate
- -40°C to +85°C temperature range
- Accuracy typically
- 0.5° (-40°C to +85°C)
- 0.15° at +25°C
Order Codes and Descriptions
Single Axis
- G-NSDOG1-006 180 DOG1 Single axis, range +/- 180°, Vcc +8 …30VDC, output voltage +0.5…+4.5V
Dual Axis
- G-NSDOG2-001 25 DOG2 Dual axis, range ±25°, Vcc +8 …30VDC, output voltage +0.5…+4.5V
- G-NSDOG2-002 45 DOG2 Dual axis, range ±45°, Vcc +8 …30VDC, output voltage +0.5…+4.5V
- G-NSDOG2-003 90 DOG2 Dual axis, range ±90°, Vcc +8… 30VDC, output voltage +0.5…+4.5V
| |
|
| |
| Supplier: | TE Connectivity |
| Packaging: | 1 |
| Min. Order: | 1 |
|
|
