| Order Code:UPF-B 80 PA 24 C |
 | UPF-B Series
Miniature ultrasonic fork sensor
Target applications
- Due to the small dimension UPF-B can used in tighter spaces and importantly used to replace optical sensors which may have failed to perform due to dust, bright lights etc.
- Otherwise applications for UPF-A and UPF-B are similar.
Technical Features
- An alternative to optical fork barriers
- PNP output
- Simple and quick mounting
- Detection of parts in dirty environment
- Edge detection
- Detection of transparent parts
- High switching speed
- Water Tight, IP67, robust, oil resistant
A System
To price a complete system, enter an online quotation request for this model.
Please review the SONARANGE Accesories PDF for factory made cables.
Select the cable required by reading the data sheet and copy and paste into [COMMENTS] on your online quotation request.
PUR cable 3-pin with M8 screw connector with straight connector:
- 2m Type KAB 2K3VGPUR
- 5m Type KAB 5K3VGPUR
Properites
Fork barriers have several advantages compared to standard barriers. Transmitter and receiver are perfectly aligned. Mounting is therefore very easy. There is no mechanical misalignment possible after mounting.
Ultrasonic fork sensors in particular, are ideal if optical fork sensors fail because of high pollution or transparent objects.
The UPF-B fork sensor is compatible with optical fork sensors from point of view of installation as well as operation.
It is suitable for detecting parts or for edge detection, and has a switching speed of 500Hz which is very high for ultrasonic sensors.
Thanks to the new transducer sealing made of Viton® the UPF-B sensors are very robust against many environmental influences. In particular, they are oil resistant, unlike many other ultrasonic sensors.
open SNT Accessories PDF File(240kb)
open SNT Flyer - Production Line Sensors PDF File(840kb)
| |
|
| |
| Supplier: | SNT Sensortechnik AG |
| Packaging: | 1 |
| Min. Order: | 1 |
|
