463 Mount Eden Rd., Mount Eden,
Auckland 1024, New Zealand
Phone:+64 9 630-7871
Fax:+64 9 630-1720
Mobile:+64 27 279-6001
email:sales@mandeno.co.nz
Sensors & Instrumentation-Linear Displacement-Draw Wire Actuated-SIKO SG20 Series

Model SG20, 2000mm, 4-20mA
SIKO SG20 draw wire actuated encoder, 2000mm measuring length, with 4-20mA loop current, with integral cable, 2 metre electrical cable length, -10°C to +80°C, IP50 protection.
Order Code:SG20-2000-MWI-E1-2-T1

   
SIKO SG20 Series:
The SIKO SG20 series is a compact, wire actuated linear measuring transducer with a robust die-cast case.
Easy Mounting via 2 of M4 x 8mm tapped holes.
Standard Measuring Lengths: 1250, 1500, 1750, 2000mm.
Electrical Interface:Integral cable or connector and cable.

SIKO SG20 P10 table
SIKO SG20 with P10 encoder, 10K potentiometer. 
FeatureTechnical Information
Value of resistance10kohm
Linearity of potentiometer0.25%
Resistance tolerance±5%
Power rating1 watt
Pull-out length0mm = 0 ohm
Cable length (3 wire connection)Max = 30m
Please use the ORDER CODE BUILDER to specify for your application: 


SIKO SG20 4-20mA table
SIKO SG20 with 4-20mA output. 
FeatureTechnical Information
Output current4-20mA
Measuring transducer10K potentiometer
Operating voltage14 to 28Vdc
Load resistance< 500 ohms
Cable length (2 wire connection)Max = 30m
Please use the ORDER CODE BUILDER to specify for your application: 


SIKO SG20 0-10Vdc table
SIKO SG20 with 0-10Vdc output. 
FeatureTechnical Information
Output voltage0-10Vdc
Measuring transducer10K potentiometer
Operating voltage14 to 28Vdc
Recommend load resistance2 ~ 10Kohm to GND
Cable length (3 wire connection)Max = 20m
Please use the ORDER CODE BUILDER to specify for your application: 


Supplier:SIKO GMBH
Packaging:1
Min. Order:1