| BU Ohm-meter for indicating potentiometer resistance value. |
Binding Union 4 wire OHM-Meter for measuring and indicating potentiometer values for 0.2, 2, 20 and 200KΩ potentiometers.
With option S, 90-270Vac 50Hz power supply.
With option 69, RS232 output. |
| Order Code:9470-S-69 |
 | Binding Union Ohm-meter
● 4.5 - digit LED display
● Dimensions: 48x96x112mm
● Resistance / position and displacement
● Programmable reading
● Two programmable set-point controllers
● Switching power supply
These devices are microprocessor based indicators, and thanks to the flexible software, can be used for different applications, just by changing parameters by mean of front panel keys.
Front keys allow sequential display of the alarm operating point, min. and max. peaks, the change from instantaneous to continuous measurements of single peaks or hold function.
Model 9470 is a resistance indicator with four ranges. Model 9470 uses a 4 wire measuring circuit.
Model 9482 is suited for displacement and position measurements, delivered by 3 wires linear potentiometers, powered by the instrument itself.
Specification and drawings - see PDF file.
Optional features for this series incude:
S free 90...270 Vac Power supply
K cost+ 10...30 Vac / Vdc Power supply
W cost+ 40...120 Vdc Power supply
Y cost+ 90...240 Vdc Power supply
10 cost+ Programming
13 cost+ Non standard engineering unit
49 cost+ Remote hold function (for BCD)
49A cost+ Hold function from potential free contacts
49B cost+ Hold function from potential free contacts on wires connect.
59 cost+ 0...10V /4….20mA Analog output
60 cost+ 0...5V /0...10mA Analog output
61 cost+ ±5V / -3...+5V Analog output
66 cost+ BCD parallel Output TTL level
68 cost+ BCD parallel Output 24V
69 cost+ RS232D Serial output
70 cost+ RS485 Serial output
91 cost+ Binding Union Calibration certificate | |
|
| |
| Supplier: | Binding Union s.r.i |
| Packaging: | 1 |
| Min. Order: | 2 |
|
|
