| DA10-14-00025-1-I-RH30-WK-A-1-O-0 |
| SIKO DA10 digital position indicator, view window 14, 00025 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal |
| Order Code:DA10-14-00025-1-I-RH30-WK-A-1-O-0 |
 | SIKO Digital Position Indicator for larger spindles.
Technical data:- Basic display = 5 decades + vernier scale
- Digit Size = 6mm
- Hollow shaft diameter = Type WK = 30mm, Type WL = 25mm
- Housing = High impact Polyamid
- Weight = 100 grams approximately
- Ambient temperature range = + 80°C
- Maximum Speeds depend on pitch:: from 1500 rpm to 150 rpm
Options:- Please use the "order code builder" to create new order codes
- Special pitches. Recommend DE10P, field programmable version.
- mm/inch: display of metric or imperial pitch.
The entire value is used for internal calculation, but is not displayed. The display value and calculated numerical value are separated by “/”.
Example: 4 mm = 0.15748 inch:
Display value 000.15; calculated numerical value .../748. The /748 is hidden until it accumulates to be displayed. ie 1T=0.15/748; 2T=0.31/496- Reducing sleeves
- Mineral glass viewing window, solvent resistant.
- Reducing sleeves to adapt to various spindle diameters.
- Axial seal (dust-proof)
Product Marking:
DA10-xxxx xxx
Replacing DA10: Order as DA10-xxxx(substitute x for numbers.)
New orders: Use a stock order code or create using the Order Code Builder to define your requirements.
xxx is production batch number.
| |
|
| |
| Supplier: | SIKO GMBH |
| Packaging: | 1 |
| Min. Order: | 0 |
|
|
