| Series 150 for 38mm displacement |
| Firstmark Controls wire actuator, series 150 with left hand cable pull, light cable tension, no special mounting base parts. |
| Order Code:150-0121-L1N-305-457 |  | Firstmark Controls Series 150
Analogue output, ultra-small sub miniature position transducer.
1: 1.5-Inch (38-mm) Maximum Travel
2: Analogue Signal Using Precision Conductive Plastic Potentiometer
3: AccuTrak™Grooved Drum for Enhanced Repeatability
4: Small, Robust Design
5: Choice of Displacement Cable Pull Direction
DirectConnect™ Sensor-To-Drum Technology = Zero Backlash, No Torsion Springs or Clutches
Potentiometer Specifications
| Potentiometer Type | 1-turn, precision, conductive plastic | | Resistance: Value, Tolerance | 5K ohms, ±10% | | Travel: Electrical, Mechanical | 340°, 340° min | | Mechanical Life | 5 million shaft revolutions min | | Output Signal | analog signal from 0 to supply voltage (voltage divider circuit) | | Power Rating | 0.75 W at 158° F (70° C) | | Supply Current | 12 mA max | | Supply Voltage | 35 VDC max (using voltage divider circuit) | | Independent Linearity Error | ±1.0% max per VRCI-P-100A | | Output Smoothness | 0.1% max | | Insulation Resistance | 1000 Mohms at 500 VDC min | | Dielectric Strength | 500 VDC min | | Resolution | infinite signal | | Operating Temperature | -85° to +257° F (-65° to +125° C) | | Shock, Vibration | 100 g for 6 ms, 10 to 2000 Hz at 15 g per Mil-R-39023 | | Temperature Coefficient | ±400 ppm/°C max |
Options
• Cable displacement tension
• left and right hand cable pull
• mounting base plates.
Other Specifications
Case materials: Precision machined Anodised 2024 aluminium.
Measuring Cable: 7 by 7 strand stainless steel, 0.46mm diameter, 177N breaking strain.
Electrical cable: 250mm cable with teflon insultation.
Typical weight: 15 gram
Water Protection: NEMA 3S/IP54.
Link to newsletters: http://www.firstmarkcontrols.com/pmcmain.htm
| |

|
| |
| Supplier: | Firstmark Controls |
| Packaging: | 1 |
| Min. Order: | 1 |
|
|