| Order Code:MRU-4001-031 |
 | The METRIKEMP™ magnetostrictive linear displacement transducer provides highly accurate absolute position measurement of displacement up to 120 inches (3 meters). This series maintains the order coding followed with the MS Schaevitz MRU family. These models will terminate as the new KYDM series dominates.
The sensor also measures velocity, giving feedback of both position and velocity simultaneously. Operation is based on accurately measuring the distance from a predetermined point to a magnetic field produced by a movable permanent magnet. The design and durability of the sensor make it ideal for measuring position of moving machine members.
Excellent Performance
A marked improvement over potentiometers for long stroke position measurement, the METRIKEMP™ possesses exceptional linearity, even over lengths up to 120 inches (3 meters), with repeatability up to 0.002% of the measurement range. By utilising magnetostrictive technology, METRIKEMP, requires no contact between parts that cause friction or premature wear, offering high reliability and extended life. Good stroke-to-length ratio provides for a more compact long stroke position sensor.
Universal Analog Outputs
METRIKEMP™ translates this time-based position measurement into an analog output signal. A user selectable 0 to 10 VDC voltage (either low or high frequency response) or a 4-20 mA current (3-wire) output is available in either forward or reverse slope signals. Additionally, velocity of the moving magnet ring (up to 10 in/sec) is generated by differentiating the position signal.
• full data in the pdf file.
Options:
• Spare Magnets
• Open slot magnets (side removal)
• Spherical sealed sanitary fluid float kit
• Sanitary SS for with thick wall tubes for stirred fluids such as milk.
Note:
Common USA part number is
MRU-3000-XXX, Calibration Chart =V/in, mounting = Imperial
MRU-4001-XXX, Calibration chart =V/cm, mounting = metric
006 in = 015 cm (150mm)
012 in = 031 cm (300mm)
018 in = 045 cm (450mm) etc
May 2005.
New digital models introduced with SSI, binary and ASCII interfaces. Please call to discuss your requirement.
| |
|
| |
| Supplier: | Kangyu |
| Packaging: | 1 |
| Min. Order: | 1 |
|
