463 Mount Eden Rd., Mount Eden,
Auckland 1024, New Zealand
Phone:+64 9 630-7871
Fax:+64 9 630-1720
Mobile:+64 27 279-6001
email:sales@mandeno.co.nz
Sensors & Instrumentation-Vacuum Measurement-Digital Devices-Model 2002

HPM 2002
Digital vacuum gauge. 1 x 10-4 Torr to ATM.
Order Code:HPM 2002

   
The Model 2002™, dual Sensor Vacuum Gauge, is a wide-range vacuum instrument consisting of a digital; microprocessor-based display unit; two sensing elements (micro-Pirani and piezoresistive bridge) in a single tube shell; and an interconnecting cable. Together, these components provide accurate vacuum measurement over 7 decades of pressure from 10-4 Torr to 1000 Torr.

This instrument is a new design approach, based on over 50 years of experience of Hastings Instruments with well-known pressure measurement techniques. A single tube contains both a Hastings patented thin film Pirani sensor and a piezoresistive sensor in a small and inexpensive package. The piezoresistive bridge is a direct force sensor which gives very accurate readings at high pressures from atmosphere down to less than 1 Torr without the concerns of gas composition.

The thin film Pirani measures pressures from a few Torr down to less than 1x10-4 Torr. An algorithm reading in the microprocessor ensures a seamless transition between sensors. Additionally, the two sensor outputs are used in a cross calibration mode to give even higher accuracy.



Supplier:Teledyne Hastings Instruments
Packaging:1
Min. Order:1