HomeCatalogue SearchCatalog StructureNewsletterUser AreaContact UsHelp
Smart Catalogue structure :: Sensors & Instrumentation :: Linear Displacement :: Digital Position Indicators

Product Type Selection

Sensors & Instrumentation - Linear Displacement - Digital Position Indicators


SIKO digital position indicators for spindle shafts. Both mechanical and programmable electronic versions available.


Jump to family:

 SIKO DA04 Series
 SIKO DA09S Series
 SIKO DA10 Series
 SIKO DK01, DK02, DK03
 SIKO DA10R/1 series
 SIKO AP04 Series
 SIKO DE04 series
 SIKO DE10 Series
 SIKO DE10P Series
 SIKO DKE01 series
 SIKO AP05 Series

SIKO DA04 Series
SIKO digital indicator with easily read display and vernier scale. Designed for tightly spaced access and spindle diameters of 14mm or less.

Features
  • Small size 33x47x31mm.
  • Standard hollow shaft 14mm.
  • Counter 4 decades plus vernier scale.
  • Digits are 6mm high.
  • Weight is 0.05Kg each.
  • Housing Colour SIKO Orange.

Product marking

DA04-xxxx xxx
xxx-xx-xx-xx

Top Line where -xxxx is a number 0001 to 9999 = short order code and where xxx is a production batch number.
Replacements: Order as DA04-xxxx(substitute x for numbers).
New orders: Use the a stock order code or use the ORDER CODE BUILDER to define your requirements.

Second line refers to part of the long product code per the data sheet or our on-line ORDER CODE BUILDER.
Ordercode Builders:
1.RH04-0004 ... [more details]
RH04-12mm
2.DA04-02-0010-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 10 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
3.DA04-02-0010-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 10 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
4.DA04-02-0017/5-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 17/5 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
5.DA04-02-0017/5-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 17/5 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without axial seal, no intermediate plate
6.DA04-02-0020-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 20 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate.
7.DA04-02-0020-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 20 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate.
8.DA04-02-0030-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 30 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
9.DA04-02-0030-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 30 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
10.DA04-02-0050-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 50 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
11.DA04-02-0060-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 60 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
12.DA04-02-0060-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 60 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate

SIKO DA09S Series
SIKO digital indicator model DA09S with easily read display and vernier scale.
The special features are:
  • cushioned figure roller system giving long service life
  • magnifying window for improved readability
  • universally applicable with 4 viewing positions
  • mechanism protected by labyrinth box
  • DA09 = 100% exchangeable with DA09S + intermediate plate
Options:
  • special pitches (+25pcs) (but please consider programmable version!)
  • mm/inch: display of metric or imperial pitch.
    The entire value is used for internal calculation, but is not displayed. The display value and calculated numerical value are separated by “/”.
    Example: 4 mm = 0.15748 inch:
    Display value 000.15; calculated numerical value .../748. The /748 is hidden until it accumulates to be displayed. ie 1T=0.15/748; 2T=0.31/496
  • Reducing sleeves
  • Counting mechanism cover made of solvent-resistant mineral glass.
  • Stainless steel shaft(and SS reduction sleeves)
  • Axial seal (dust-tight)
  • Waterproof version.

Product marking:
DA09S-xxxx xxx
xxx-xx-xx-xx

Top Line where -xxxx is a number 0001 to 9999 = short order code
Oct 2014 More than 9999 models and Alpha/Numeric code adopted ie A001
where xxx is a production batch number.
Replacing DA09S: Order as DA09S-xxxx(substitute x for numbers.)
Replacing DA09: Order as DA09S-xxxx plus DA09S-ET-0001 (spacer plate)
New orders: Use a stock order code or create using the Order Code Builder to define your requirements.

Second line refers to first part of the long product code. Refer to the data sheet or our on-line Order Code Builder.
Ordercode Builders:
1.DA09S-02-00025-2-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00025 display after one revolution, comma position 2 (000.00), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows.
2.DA09S-02-00020-1-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
3.DA09S-02-00030-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00030 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
4.DA09S-02-00030-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00030 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
5.DA09S-02-00040-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00040 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
6.DA09S-02-00040-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00040 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
7.DA09S-02-00050-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00050 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
8.DA09S-02-00050-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00050 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
9.DA09S-02-00060-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00060 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
10.DA09S-02-00060-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00060 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
11.DA09S-02-00100-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00100 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
12.DA09S-02-00100-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00100 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
13.DA09S-3322 ... [more details]
SIKO DA09S digital indicator, view window 02, 00200 display after one revolution, comma position 0 (00000), CW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, g
14.DA09S-02-00400-2-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00400 display after one revolution, comma position 2 (000.00), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
15.DA09S-02-01000-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 01000 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
16.DA09S-02-00015-1-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00015 display after one revolution, comma position 1 (0000.0), CCW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
17.DA09S-02-00020-1-i-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
18.DA09S-04-00025-1-e-RH-20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 04, 00025 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
19.DA09S-04-00040-1-e-RH-20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 04, 00040 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
20.DA09S-04-00040-1-i-RH-20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 04, 00040 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
21.DA09S-02-00010-1-i-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00010 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
22.DA09S-02-00020-2-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 2 (000.00), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows.
23.DA09S-02-00010-1-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00010 display after one revolution, comma position 1 (0000.0), CCW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
24.DA09S-02-00015-1-i-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00015 display after one revolution, comma position 1 (0000.0), CW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
25.DA09S-07-00020-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 07, 00020 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
26.DA09S-07-00030-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 07, 00030 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
27.DA09S-07-00030-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 07, 00030 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
28.DA09S-02-00020-2-i-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 2 (000.00), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows.
29.DA09S-RH01-10 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 10mm ID
30.DA09S-RH01-12 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 12mm ID
31.DA09S-RH01-16 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 16mm ID
32.DA09S-RH01-18 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 18mm ID
33.DA09S-RH01-08 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 8mm ID
34.DA09S-AS ... [more details]
SIKO DA09S axial seal
35.DA09S-ET-0001 ... [more details]
SIKO intermediate plate to pad out the depth of the DA09S type A pin to match the depth of the older model, DA09, type A pin.

SIKO DA10 Series
SIKO Digital Position Indicator for larger spindles.

Technical data:
  • Basic display = 5 decades + vernier scale
  • Digit Size = 6mm
  • Hollow shaft diameter = Type WK = 30mm, Type WL = 25mm
  • Housing = High impact Polyamid
  • Weight = 100 grams approximately
  • Ambient temperature range = + 80°C
  • Maximum Speeds depend on pitch:: from 1500 rpm to 150 rpm


Options:
  • Please use the "order code builder" to create new order codes
  • Special pitches. Recommend DE10P, field programmable version.
  • mm/inch: display of metric or imperial pitch.
  • The entire value is used for internal calculation, but is not displayed. The display value and calculated numerical value are separated by “/”.
    Example: 4 mm = 0.15748 inch:
    Display value 000.15; calculated numerical value .../748. The /748 is hidden until it accumulates to be displayed. ie 1T=0.15/748; 2T=0.31/496
  • Reducing sleeves
  • Mineral glass viewing window, solvent resistant.
  • Reducing sleeves to adapt to various spindle diameters.
  • Axial seal (dust-proof)


Product Marking:
DA10-xxxx xxx
Replacing DA10: Order as DA10-xxxx(substitute x for numbers.)
New orders: Use a stock order code or create using the Order Code Builder to define your requirements.

xxx is production batch number.
Ordercode Builders:
1.DA10-12-00020-1-E-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00020 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
2.DA10-12-00020-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00020 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
3.DA10-12-00040-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00040 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
4.DA10-12-00050-1-E-RH25-WL-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00050 display value after 1 revolution, decimal position 1 (0000.0), CCW increasing, 25mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal
5.DA10-12-00050-1-I-RH25-WL-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00050 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal
6.DA10-12-00063/5-1-E-RH30-WL-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00063/5 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal
7.DA10-12-00063/5-1-I-RH30-WL-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00063/5 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal
8.DA10-12-00100-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00100 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
9.DA10-14-00025-1-E-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 14, 00025 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
10.DA10-14-00025-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 14, 00025 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
11.DA10-16-00060-1-E-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 16, 00060 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
12.DA10-16-00060-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 16, 00060 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
13.DA10-17-00060-1-E-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 17, 00060 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
14.DA10-17-00060-1-i-RH25-WK-A-II-O-K-AD-BP ... [more details]
SIKO DA10 digital position indicator, view window 17, 00060 display value after 1 revolution, decimal position 1 (0000.0), CW increasing, 25mm hollow shaft, design WK, (grub screw), type A torque pin, at position II, orange housing, plastic view window, w
15.DA10-RH03-22 ... [more details]
SIKO DA10 series reducing sleeve OD=25mm, ID=22mm diameter for hollow shaft design type WL.
16.DA10-RH02-22 ... [more details]
SIKO DA10 series reducing sleeve ID=22mm diameter for hollow shaft design type WK.
17.DA10-RH02-24 ... [more details]
SIKO DA10 series reducing sleeve ID=24mm diameter for hollow shaft design type WK.
18.DA10-RH02-25 ... [more details]
SIKO DA10 series reducing sleeve ID=25mm diameter for hollow shaft design type WK.

SIKO DK01, DK02, DK03
SIKO innovative double function DigiTurn consists of an attractive control knob and digital position indicator in one package.
Model DK01 with the digital readout on the end face.
Model DK02 has the digital readout inline. Left and right panel versions are available.
Model DK03 is an analogue version with 1 or 2 pointers.
Model DK01 and DK02 can provide indication of valve position, spindle setting, flow, pressure, speed, rate etc.
Model DK03 opens the potential of analogue position, flow, pressure, setting adjustments. Analogue dials make it possible to consider count up and count down, centre off, and a choice between linear and non-linear measurement.
Series Options
Models DK01 and DK02
Display after 1 rev = 12/5, 15, 17/5, 20, 25, 30, 40, 50, 100
Comma in position 0,1,2,3
Counting, increasing clockwise or counter clockwise.
Standard shaft is 14mm with sleeve for 12, 10, 8mm
Handwheel form as kurnled knob or optional star knob.
Model DK03
Analogue display with 1 or 2 pointers.
Gear ratios from 2 to 48 with a std range of linear scales.
Custom scales (VK xxxx) available with 1 to 3 colour combinations.
Examples: Linear and non-linear scales. Scales showing +ve and -ve values.
Standard shaft is 14mm with sleeves for 12, 10, 8mm
Handwheel formed as kurnled knob or optional star knob.
Product Marking
DK0n-xxxx xxx
where n is 1, 2 or 3
where -xxxx is a number 0001 to 9999 = short order code
where xxx is a production batch code
Ordercode Builders:
1.DK01-100-1-e-14-RA-FR ... [more details]
SIKO DigiTurn DK01, 0100 display value after 1 turn, comma position at 1, e = counter - clockwise increasing, 14 mm hollow shaft bore size, with knurled handle, fire red handwheel colour (RSL3000)
2.DK01-100-1-i-14-RA-FR ... [more details]
SIKO DigiTurn DK01, 0100 display value after 1 turn, comma position at 1, i = clockwise increasing, 14 mm hollow shaft bore size, with knurled handle, fire red handwheel colour (RSL3000)
3.DK01-12/5-0-i-14-RA-FR ... [more details]
SIKO DigiTurn DK01, 0012/5 display value after 1 turn, no comma position, i = clockwise increasing, 14 mm hollow shaft bore size, with knurled handle, fire red handwheel colour (RSL3000)
4.DK02-08-25-1-i-14-RA-FR ... [more details]
SIKO DK02 DigiTurn, version 08 for left side panels, 0025 display value after 1 turn, comma position at 1, i = clockwise increasing, 14 mm hollow shaft bore diameter, with knurled handle, fire red handwheel colour (RSL3000)
5.DK03-10-i-2-N-C1-14-270-ST-FR ... [more details]
SIKO DK03 analogue indicator, gear ratio of 10, clockwise increasing, geared red pointer + black pointer 1:1 ratio, normal scale, 1 colour, 14 mm hollow shaft diameter, torque pin @ 270 °, with knurled handle, fire red handwheel colour (RSL3000)

SIKO DA10R/1 series
A digital position indicator with two display, specially designed to for large diameter milling machines.
Download the data sheet for a graphical explaination.
One display measures R, the tool radius.
One display measures I, the workpiece thickness.
CW and CCW (i and e) versions available.
Options include axial seals, reduction sleeves.
Counters:
  • Radius 4 decades+vernier scale
  • Height, 5 decades+vernier scale

Digit Height: approximately 6mm
Housing: Polyamide 6, shockproof
Weight: 0.1Kg
Ambient Temperature: +80°C

Product Marking,
< >DA10R-xxxx xxx
< >< >where -xxxx is a number 0001 to 9999 = short order code
< >< >where xxx is a production batch code
Ordercode Builders:
1.DA10R/1-00040-1-e-25-WL-B-II-S-K-AD ... [more details]
SIKO DA10R/1 series, 00040 display after first revolution, comma position 1 (0000.0), ccw increasing, with 25mm hollow shaft, design WL, (knurled screw), type B torque pin, position II, natural black case, with plastic window, with an axial seal
2.DA10R/1-00020-1-i-25-WL-B-II-S-K-AD ... [more details]
SIKO DA10R/1 series, 00020 display after first revolution, comma position 1 (0000.0), cw increasing, with 25mm hollow shaft, design WL, (knurled screw), type B torque pin, position II, natural black case, with plastic window, with an axial seal

SIKO AP04 Series
SIKO digital position indicator type AP04 is designed to add efficiency and accuracy to the manual set up of production machinery according to settings held within an associated controller.
The AP04 may be used in conjunction with the MX04 display, providing a simple solution ideal for retro fitting to conventional systems using mechanical display such as DA04, DA09S, DA10.

The key advantages of the AP04 indicator are:
  1. A two-line LCD display for target and current value.
  2. Red/Green LED used to indicate setting position.
  3. A compact size, with a 20 mm through hollow shaft.
  4. A high-contrast 7mm LCD for good readability.

A target value can be programmed by the controller to the axis via an integrated bus interface such as RS485 or Can-Open. The machine operator can then rotate the adjustment spindle so that the current value matches the target value. This ensures fast and, above all, faultless axis positioning even with manual operation.
The controller is always able to monitor the current value of individual position indicators in the coded bus system.
There is no need for referencing when the supply voltage is switched on again, as the integrated position sensor provides an absolute evaluation of the rotation.
A high degree of flexibility is offered by free programmability, e.g. spindle pitch, comma position, sense of rotation and 180° display rotation.
The position indicator type AP04 is ideal for companies seeking quick, error-free positioning of machine axes, even in a restricted space.
Dec 2014: SIKO introduces AP10, AP10S and AP10T with extra programming capabilities and back-lighting, which enables low light installation and operation.

Please download the complete SIKO MX40-AP04-AP04S-AP24.PDF short form catalogue.(opens in a blank window) open the link

Please read SIKO flyer covering Automation with ETC5000 plug and play control panel, AP04 and driveline. (Opens in a new window.) open the link
1.AP04-0002 ... [more details]
SIKO factory programmed version of AP04

SIKO DE04 series
The SIKO DE04 Programmable Position Indicator
The electronic position indicator DE04 can be used flexibly because of programmable display values and availability of three function keys. In difference to usual mechanical counters the battery-powered indicators from SIKO offer the following user benefits:
  • Display value and decimal point freely programmable
  • Selection between angle measurement and linear measurement
  • Reset function
  • Incremental function
  • Offset value programmable at the device
  • Higher shaft speed of 600 rpm
  • Users can configure the display values themselves by using the optional PC-based software ProToolDE.
    The DE04 is linked to the computer via a custom USB cable.

ADVANTAGE OVERVIEW
Features
  • large display (figure height 8 mm)
  • maximum hollow shaft diameter 16mm.
  • freely programmable via PC -> programming tool (optional accessory)
  • programme display for imperial, metric and angles
  • battery can be easily replaced
  • battery life 24 months
  • incremental measurement function, display of absolute value
  • easy mounting


updated March 2015
Ordercode Builders:
1.DE04-02-300-1-1-i-D-RH16-R-A-B2 ... [more details]
SIKO DE04 programmable digital indicator, for horizontal spindle, standard model, decimal point = 0000.0, display divisor = 1, cw increasing, without delay, with 16mm hollow shaft, red housing, cylindrical torque pin, 2 year battery service life

SIKO DE10 Series
The SIKO DE10 Programmable Position Indicator
The SIKO DE10 is very flexible because of the range of programmable features and availability of three function keys.
With respect to the usual mechanical counters, the battery-powered indicators from SIKO offer the following user benefits:
  • Display value and decimal point freely programmable
  • Selection between angle measurement and linear measurement.
  • Reset function
  • Incremental function
  • Offset value programmable at the device
  • Higher shaft speed of 600 rpm


The user can configure the display values by using the optional PC-based software ProTool DE. The position indicator is linked to the computer via a custom USB cable.
ADVANTAGE OVERVIEW
Features
  • large display (figure height 11.5 mm)
  • max. hollow shaft diameter 30mm
  • freely programmable via PC -> programming tool (optional accessory)
  • programme display for imperial, metric or angle measurement and
    compensate for minor errors in spindle thread pitch
  • battery can be easily replaced
  • battery life 24 months, (optionally 8 years)
  • incremental measurement function, display of absolute value
  • easy mounting

updated Nov 2012
Ordercode Builders:
1.ProTool DE ... [more details]
SIKO DE04 and DE10 programming software for PC with USB 2.0 interface.
2.DE10-02-...-1-1-i-D-RH30-R-A-B2 ... [more details]
SIKO DE10 digital indicator, for horizontal spindle, standard model, decimal point = 0000.0, display divisor = 1, cw increasing, without delay, with 30mm hollow shaft, Red housing, cylindrical torque pin, 2 year battery service life

SIKO DE10P Series
The SIKO DE10P User Programmable Position Indicator

A key advantage is the possibility of programming all parameters of the position indicator directly at the device. This enables a basic device to be individually adapted to the particular application without need of further accessories. All settings such as spindle pitch, reading position, counting direction and key function can be programmed directly via the key pad.
Advantage Overview
Features
  • Freely programmable directly via keys on the indicator
  • Hollow shaft max. Ø 30 mm
  • Hollow shaft made of stainless steel
  • 30mm & 20mm hollow shaft diameters standard
  • reducing sleeves available
  • LCD display with 6 digit and special characters
  • Digit height approx. 11 mm
  • Long battery service life
  • Easily exchangeable batteries (Standard AAA)
  • Incremental measurement function, display of absolute value
  • High protection category
1.DE10P-0001 ... [more details]
SIKO DE10P-30-O-S-IP65, DE10P, 30mm hollow shaft, orange body, Stainless Steel sleeve, IP65 sealing.

SIKO DKE01 series
The SIKO DKE01 Programmable Indicator and Hand wheel

In 1963, SIKO GmbH invented a mechanical position indicator integrated in a hand wheel – a product the field of mechanical engineering could hardly do without today. As inexpensive and easy-to-use gauges, SIKO hand wheels with integrated position displays reliably perform a variety of tasks ranging from roll positioning, aligning limit stops and tools, to manual metering settings.

The new DKE01 adjustment knob with LCD display combines the experience of nearly 50 years of positioning technology with the state-of-the art functionality of an electronic display. Because the display values are user-definable, it is possible to handle the most diverse of challenges with one flexible device. The managing of multiple types of devices, and therefore also keeping the parts required for them on-hand has become a thing of the past. Extra features such as allowance for offset values and a reset button for calibration expand the range of uses.

Thanks to a particularly energy-efficient measuring technique, the electronic DKE01 adjustment knob has a battery life of eight years. The power is supplied using a conventional coin battery, which can be easily replaced by the device user at the end of its service life. Last but not least, the DKE01 sports an impressive contemporary design, thus giving each machine that special je ne sais quoi.

ADVANTAGE OVERVIEW
Features
  • Electronic rotary knob with integrated LCD display, 5digits
  • Digit height approx. 11.5 mm
  • Freely programmable display values using the SIKO PROTool DE series software.
    Supports linear metric, imperial displacement. Build machines with one screw thread pitch and export to metric or imperial markets
  • Supports degree angle measurement.
  • For length or angle measurement push button offsets available
  • Shaft accommodation max. 20 mm
  • Long battery service life
  • With digital scales the read-out value does not vary with viewing angle making digital versions more useful than analogue version where scales are less precise over all view angles
  • Mounting by torque-pin, like DA indicators. Mounting compatible with SIKO DA09S and DE10
  • Protection class IP65

Nov 2012

DKE01-HS, An HS Hand wheel versions released.
Please use the Order Code Builder to create your requirements for quotation.
Nov 2013
Ordercode Builders:
1.DKE01-0001 ... [more details]
SIKO DKE01 programmable indicator and handwheel

SIKO AP05 Series
Electronic position indicator AP05
The AP05 position indicator guides the user intuitively to the correct machine setting, following a product or format change. The optimized backlit display indicates target value and actual value required. Two LEDs, left and right of the display, show the machine operator the direction, CW or CCW, to match the target and actual values.
The AP05 helps avoid wrong machine settings and enhances process safety of flexible production machines.

The key advantages of the AP05 indicator are:
  1. Electronic position indicator with bus interface
  2. Backlit two-row LCD
  3. Display of target and actual value displays with integrated alignment
  4. User guidance through status LEDs
  5. Hollow shaft with Ø 20 mm and clamping ring made of stainless steel
  6. Enhanced shock resistance owing to protective display glass
  7. Integrated RS485 interface, CAN bus as an option
  8. Robust sensor technology unit thanks to magnetic scanning
  9. Mechanically compatible with the AP04 and DA04 position indicators
  10. IP53 type of protection, IP65 as an option
1.AP05-XXXX ... [more details]
SIKO AP05 with RS485/SIKONET 5, 20mm hollow shaft, without additional mounting plate, ip65 sealing, with standard software