HomeCatalogue SearchCatalog StructureNewsletterUser AreaContact UsHelp
Smart Catalogue structure :: Sensors & Instrumentation :: Linear Displacement :: Digital Position Indicators

Product Type Selection

Sensors & Instrumentation - Linear Displacement - Digital Position Indicators


SIKO digital position indicators for spindle shafts. Both mechanical and programmable electronic versions available.


Jump to family:

 SIKO DA04 Series
 SIKO DA09S Series
 SIKO DA10 Series
 SIKO DK01, DK02, DK03
 SIKO DA10R/1 series
 SIKO AP05, AP10, AP20 Series
 SIKO DE04 series
 SIKO DE10 Series
 SIKO DE10P Series
 SIKO DKE01 series
 SIKO Driveline Positioning

SIKO DA04 Series
SIKO digital indicator with easily read display and vernier scale. Designed for tightly spaced access and spindle diameters of 14mm or less.

Features
  • Small size 33x47x31mm.
  • Standard hollow shaft 14mm.
  • Counter 4 decades plus vernier scale.
  • Digits are 6mm high.
  • Weight is 0.05Kg each.
  • Housing Colour SIKO Orange.

Product marking

DA04-xxxx xxx
xxx-xx-xx-xx

Top Line where -xxxx is a number 0001 to 9999 = short order code and where xxx is a production batch number.
Replacements: Order as DA04-xxxx(substitute x for numbers).
New orders: Use the a stock order code or use the ORDER CODE BUILDER to define your requirements.

Second line refers to part of the long product code per the data sheet or our on-line ORDER CODE BUILDER.
1.RH04-0004 ... [more details]
RH04-12mm
2.DA04-02-0010-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 10 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
3.DA04-02-0010-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 10 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
4.DA04-02-0017/5-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 17/5 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
5.DA04-02-0017/5-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 17/5 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without axial seal, no intermediate plate
6.DA04-02-0020-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 20 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate.
7.DA04-02-0020-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 20 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate.
8.DA04-02-0030-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 30 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
9.DA04-02-0030-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 30 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
10.DA04-02-0050-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 50 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
11.DA04-02-0060-1-E-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 60 display after 1 revolution, comma position 1, CCW=counter-clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate
12.DA04-02-0060-1-I-RH14-O-A-0-O-0 ... [more details]
SIKO DA04, 02 view window, 60 display after 1 revolution, comma position 1, CW=clockwise increasing, 14mm hollow shaft, orange case, type A torgue pin, without locking lever, without axial seal, no intermediate plate

SIKO DA09S Series
SIKO digital indicator model DA09S with easily read display and vernier scale.
The special features are:
  • cushioned figure roller system giving long service life
  • magnifying window for improved readability
  • universally applicable with 4 viewing positions
  • mechanism protected by labyrinth box
  • DA09 = 100% exchangeable with DA09S + intermediate plate
Options:
  • special pitches (+25pcs) (but please consider programmable version!)
  • mm/inch: display of metric or imperial pitch.
    The entire value is used for internal calculation, but is not displayed. The display value and calculated numerical value are separated by “/”.
    Example: 4 mm = 0.15748 inch:
    Display value 000.15; calculated numerical value .../748. The /748 is hidden until it accumulates to be displayed. ie 1T=0.15/748; 2T=0.31/496
  • Reducing sleeves
  • Counting mechanism cover made of solvent-resistant mineral glass.
  • Stainless steel shaft(and SS reduction sleeves)
  • Axial seal (dust-tight)
  • Waterproof version.

Product marking:
DA09S-xxxx xxx
xxx-xx-xx-xx

Top Line where -xxxx is a number 0001 to 9999 = short order code
Oct 2014 More than 9999 models and Alpha/Numeric code adopted ie A001
where xxx is a production batch number.
Replacing DA09S: Order as DA09S-xxxx(substitute x for numbers.)
Replacing DA09: Order as DA09S-xxxx plus DA09S-ET-0001 (spacer plate)
New orders: Use a stock order code or create using the Order Code Builder to define your requirements.

Second line refers to first part of the long product code. Refer to the data sheet or our on-line Order Code Builder.
1.DA09S-02-00025-2-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00025 display after one revolution, comma position 2 (000.00), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows.
2.DA09S-02-00020-1-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
3.DA09S-02-00030-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00030 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
4.DA09S-02-00030-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00030 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
5.DA09S-02-00040-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00040 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
6.DA09S-02-00040-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00040 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
7.DA09S-02-00050-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00050 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
8.DA09S-02-00050-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00050 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
9.DA09S-02-00060-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00060 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
10.DA09S-02-00060-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00060 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
11.DA09S-02-00100-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00100 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
12.DA09S-02-00100-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00100 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
13.DA09S-3322 ... [more details]
SIKO DA09S digital indicator, view window 02, 00200 display after one revolution, comma position 0 (00000), CW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, g
14.DA09S-02-00400-2-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 00400 display after one revolution, comma position 2 (000.00), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
15.DA09S-02-01000-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 02, 01000 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
16.DA09S-02-00015-1-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00015 display after one revolution, comma position 1 (0000.0), CCW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
17.DA09S-02-00020-1-i-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
18.DA09S-04-00025-1-e-RH-20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 04, 00025 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
19.DA09S-04-00040-1-e-RH-20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 04, 00040 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
20.DA09S-04-00040-1-i-RH-20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 04, 00040 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
21.DA09S-02-00010-1-i-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00010 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate
22.DA09S-02-00020-2-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 2 (000.00), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows.
23.DA09S-02-00010-1-e-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00010 display after one revolution, comma position 1 (0000.0), CCW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
24.DA09S-02-00015-1-i-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00015 display after one revolution, comma position 1 (0000.0), CW increasing, steel 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows
25.DA09S-07-00020-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 07, 00020 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
26.DA09S-07-00030-1-e-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 07, 00030 display after one revolution, comma position 1 (0000.0), CCW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
27.DA09S-07-00030-1-i-RH20-O-A-K-OAD-OZP ... [more details]
SIKO DA09S digital indicator, view window 07, 00030 display after one revolution, comma position 1 (0000.0), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate.
28.DA09S-02-00020-2-i-RH20-O-A-K-OAD-OZP-BP-ORP ... [more details]
SIKO DA09S digital indicator, view window 02, 00020 display after one revolution, comma position 2 (000.00), CW increasing, with 20mm hollow shaft, orange housing, torque pin style A, plastic window, without an axial seal, without an intermediate plate, gasket enclosed, without direction arrows.
29.DA09S-RH01-10 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 10mm ID
30.DA09S-RH01-12 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 12mm ID
31.DA09S-RH01-16 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 16mm ID
32.DA09S-RH01-18 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 18mm ID
33.DA09S-RH01-08 ... [more details]
SIKO DA09S reduction sleeve, 20mm OD to 8mm ID
34.DA09S-AS ... [more details]
SIKO DA09S axial seal
35.DA09S-ET-0001 ... [more details]
SIKO intermediate plate to pad out the depth of the DA09S type A pin to match the depth of the older model, DA09, type A pin.

SIKO DA10 Series
SIKO Digital Position Indicator for larger spindles.

Technical data:
  • Basic display = 5 decades + vernier scale
  • Digit Size = 6mm
  • Hollow shaft diameter = Type WK = 30mm, Type WL = 25mm
  • Housing = High impact Polyamid
  • Weight = 100 grams approximately
  • Ambient temperature range = + 80°C
  • Maximum Speeds depend on pitch:: from 1500 rpm to 150 rpm


Options:
  • Please use the "order code builder" to create new order codes
  • Special pitches. Recommend DE10P, field programmable version.
  • mm/inch: display of metric or imperial pitch.
  • The entire value is used for internal calculation, but is not displayed. The display value and calculated numerical value are separated by “/”.
    Example: 4 mm = 0.15748 inch:
    Display value 000.15; calculated numerical value .../748. The /748 is hidden until it accumulates to be displayed. ie 1T=0.15/748; 2T=0.31/496
  • Reducing sleeves
  • Mineral glass viewing window, solvent resistant.
  • Reducing sleeves to adapt to various spindle diameters.
  • Axial seal (dust-proof)


Product Marking:
DA10-xxxx xxx
Replacing DA10: Order as DA10-xxxx(substitute x for numbers.)
New orders: Use a stock order code or create using the Order Code Builder to define your requirements.

xxx is production batch number.
1.DA10-12-00020-1-E-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00020 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
2.DA10-12-00020-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00020 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
3.DA10-12-00040-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00040 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
4.DA10-12-00050-1-E-RH25-WL-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00050 display value after 1 revolution, decimal position 1 (0000.0), CCW increasing, 25mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal
5.DA10-12-00050-1-I-RH25-WL-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00050 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal
6.DA10-12-00063/5-1-E-RH30-WL-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00063/5 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal
7.DA10-12-00063/5-1-I-RH30-WL-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00063/5 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WL, (knurled screw), type A torque pin, at position 1, orange housing, without axial seal
8.DA10-12-00100-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 12, 00100 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
9.DA10-14-00025-1-E-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 14, 00025 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
10.DA10-14-00025-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 14, 00025 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
11.DA10-16-00060-1-E-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 16, 00060 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
12.DA10-16-00060-1-I-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 16, 00060 display value after 1 revolution, decimal position 1, CW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
13.DA10-17-00060-1-E-RH30-WK-A-1-O-0 ... [more details]
SIKO DA10 digital position indicator, view window 17, 00060 display value after 1 revolution, decimal position 1, CCW increasing, 30mm hollow shaft, design WK, (grub screw), type A torque pin, at position 1, orange housing, without axial seal
14.DA10-17-00060-1-i-RH25-WK-A-II-O-K-AD-BP ... [more details]
SIKO DA10 digital position indicator, view window 17, 00060 display value after 1 revolution, decimal position 1 (0000.0), CW increasing, 25mm hollow shaft, design WK, (grub screw), type A torque pin, at position II, orange housing, plastic view window, w
15.DA10-RH03-22 ... [more details]
SIKO DA10 series reducing sleeve OD=25mm, ID=22mm diameter for hollow shaft design type WL.
16.DA10-RH02-22 ... [more details]
SIKO DA10 series reducing sleeve ID=22mm diameter for hollow shaft design type WK.
17.DA10-RH02-24 ... [more details]
SIKO DA10 series reducing sleeve ID=24mm diameter for hollow shaft design type WK.
18.DA10-RH02-25 ... [more details]
SIKO DA10 series reducing sleeve ID=25mm diameter for hollow shaft design type WK.

SIKO DK01, DK02, DK03
SIKO innovative double function DigiTurn consists of an attractive control knob and digital position indicator in one package.
Model DK01 with the digital readout on the end face.
Model DK02 has the digital readout inline. Left and right panel versions are available.
Model DK03 is an analogue version with 1 or 2 pointers.
Model DK01 and DK02 can provide indication of valve position, spindle setting, flow, pressure, speed, rate etc.
Model DK03 opens the potential of analogue position, flow, pressure, setting adjustments. Analogue dials make it possible to consider count up and count down, centre off, and a choice between linear and non-linear measurement.
Series Options
Models DK01 and DK02
Display after 1 rev = 12/5, 15, 17/5, 20, 25, 30, 40, 50, 100
Comma in position 0,1,2,3
Counting, increasing clockwise or counter clockwise.
Standard shaft is 14mm with sleeve for 12, 10, 8mm
Handwheel form as kurnled knob or optional star knob.
Model DK03
Analogue display with 1 or 2 pointers.
Gear ratios from 2 to 48 with a std range of linear scales.
Custom scales (VK xxxx) available with 1 to 3 colour combinations.
Examples: Linear and non-linear scales. Scales showing +ve and -ve values.
Standard shaft is 14mm with sleeves for 12, 10, 8mm
Handwheel formed as kurnled knob or optional star knob.
Product Marking
DK0n-xxxx xxx
where n is 1, 2 or 3
where -xxxx is a number 0001 to 9999 = short order code
where xxx is a production batch code
1.DK01-100-1-e-14-RA-FR ... [more details]
SIKO DigiTurn DK01, 0100 display value after 1 turn, comma position at 1, e = counter - clockwise increasing, 14 mm hollow shaft bore size, with knurled handle, fire red handwheel colour (RSL3000)
2.DK01-100-1-i-14-RA-FR ... [more details]
SIKO DigiTurn DK01, 0100 display value after 1 turn, comma position at 1, i = clockwise increasing, 14 mm hollow shaft bore size, with knurled handle, fire red handwheel colour (RSL3000)
3.DK01-12/5-0-i-14-RA-FR ... [more details]
SIKO DigiTurn DK01, 0012/5 display value after 1 turn, no comma position, i = clockwise increasing, 14 mm hollow shaft bore size, with knurled handle, fire red handwheel colour (RSL3000)
4.DK02-08-25-1-i-14-RA-FR ... [more details]
SIKO DK02 DigiTurn, version 08 for left side panels, 0025 display value after 1 turn, comma position at 1, i = clockwise increasing, 14 mm hollow shaft bore diameter, with knurled handle, fire red handwheel colour (RSL3000)
5.DK03-10-i-2-N-C1-14-270-ST-FR ... [more details]
SIKO DK03 analogue indicator, gear ratio of 10, clockwise increasing, geared red pointer + black pointer 1:1 ratio, normal scale, 1 colour, 14 mm hollow shaft diameter, torque pin @ 270 °, with knurled handle, fire red handwheel colour (RSL3000)

SIKO DA10R/1 series
A digital position indicator with two display, specially designed to for large diameter milling machines.
Download the data sheet for a graphical explaination.
One display measures R, the tool radius.
One display measures I, the workpiece thickness.
CW and CCW (i and e) versions available.
Options include axial seals, reduction sleeves.
Counters:
  • Radius 4 decades+vernier scale
  • Height, 5 decades+vernier scale

Digit Height: approximately 6mm
Housing: Polyamide 6, shockproof
Weight: 0.1Kg
Ambient Temperature: +80°C

Product Marking,
< >DA10R-xxxx xxx
< >< >where -xxxx is a number 0001 to 9999 = short order code
< >< >where xxx is a production batch code
1.DA10R/1-00040-1-e-25-WL-B-II-S-K-AD ... [more details]
SIKO DA10R/1 series, 00040 display after first revolution, comma position 1 (0000.0), ccw increasing, with 25mm hollow shaft, design WL, (knurled screw), type B torque pin, position II, natural black case, with plastic window, with an axial seal
2.DA10R/1-00020-1-i-25-WL-B-II-S-K-AD ... [more details]
SIKO DA10R/1 series, 00020 display after first revolution, comma position 1 (0000.0), cw increasing, with 25mm hollow shaft, design WL, (knurled screw), type B torque pin, position II, natural black case, with plastic window, with an axial seal

SIKO AP05, AP10, AP20 Series
Electronic digital position indicators: AP Series

The SIKO AP Series advance the DA Series Mechanical Digital Position Sensors whereby an input signal instructs the user how to change the spindle value for a new format.
The APxx Series typically include a hollow shaft, a very readable 2 line backlit LCD display of the (required) set point and (actual) spindle set point value and a bus interface.
The APxxS Series are designed to read linear position via a separate magline interface or a remote GS04 spindle sensor.
Via the bus interface, target values and actual values can be exchanged between each individual absolute position indicator and an upstream control unit, (for example, the SIKO ETC5000 touch control panel)

Fieldbus and Ethernet communication for positioning displays of the AP range
The AP series initially included RS485 and CAN bus interfaces but this may vary in newer models.
Protocol converters provide additional interfaces such as Profibus, Profinet, EtherNet/IP, EtherCAT, CC-Link, DeviceNet. Protocol Convertors support the wide range of programming environments used across many brands of industrial controllers.
In New Zealand we have provided ExpertDAQ Protocal Convertors. View at https://www.expertdaq.com

Electronic position indicators are focused on the user
This monitored spindle adjustment offers significantly better process reliability and shortens setup times for a new format. At the same time, this increases machine efficiency and enhances the viability of the production equipment. The target value is displayed directly on the axle and the correct actual value entered manually is reported back, making incorrectly set stops and tool positions a thing of the past. The overall new format is not approved until all spindle positions report to the controller as correct. As a result, there is no longer any scrappage or damaged tools due to incorrectly set adjustable axles.

Also possible - linear measurement with position indicators from SIKO
By the combination of spindle position display AP10 or AP05, linear measurement system AP10S or AP04S and set point display AP10T or AP24 you can cover all adjustment points of a machine within the framework of monitored format adjustment. The hollow shaft construction allows the spindle displays AP10 and AP05 to be attached directly to an adjustment axis. The position displays AP10S and AP04S serve as positioning systems for slide adjustments in conjunction with the linear sensor MS500H. The remote displays AP10T and AP24 can be used to specify target values for format pieces or tool change directly on the machine module concerned.

Reliably and easily readable electronic position indicators
In an industrial environment, SIKO customers especially appreciate the precise and reliable recording of measurement values offered by the electronic position indicators. The movement of the axis is then no longer recorded using a gear, but in a touchless manner – using either a magnet or a capacitor. The magnetic measurement method is particularly robust and resilient to dirt or vibration and is suitable for use in normal or particularly rough environments. The generous LCD display technology also allows for a clear reading of the respective position values. A typical application: The stop adjustment on cross-cut saws depends on very precise display values. Additional flexibility is offered by the incremental measurement function implemented and by entering offset values.

The AP series is used even in more complex machine environments for easy-to-manage, semi-automated adjustment processes. The “team-based” communication is standardized, and incorrect adjustments are immediately visible in bus-operated mode.

Benefits
  • Freely programmable display values (spindle pitch, sense of rotation and decimal place)
  • Linear or angular mode
  • Reset function
  • Display of positive and negative values
  • High display accuracy
  • Easy battery change
  • Mechanically compatible with mechanical position indicators


The following SIKO Publications provide a comprehensive review the functionality of the AP Series, AGxx fieldbus driveline and ETC5000 standalone controller
SIKO FLYER for visual overview click here and open the Flyer
SIKO DriveLine catalogue (6.9mB) click here and open the DriveLine catalogue (6.9mB file)
1.AP04-0002 ... [more details]
SIKO factory programmed version of AP04
2.AP05-0001 ... [more details]
SIKO A05, with RS485 / SIKONETZ5, with 20mm diameter hollow shaft, Fixed, without an intermediate plate, with IP53 moisture protection, with industrial connector sockets, software compatible with AP04-SN5
3.AP05-0003 ... [more details]
SIKO A05, with RS485 / SIKONETZ5, with 20mm diameter hollow shaft, Fixed, without an intermediate plate, with IP65 moisture protection, with industrial connector sockets, standard AP05 software.
4.AP10-CAN-20-A-II-IP65-EX-SF-S ... [more details]
SIKO AP10, CANopen, 20mm, @ 30mm distance, IP65 protection, foil window
5.AP10S-S3/09-IP65-EX-SF-S ... [more details]
SIKO AP10S, with RS485 / SIKONET Z5 interface, IP65 moisture protection, with foil view window

SIKO DE04 series
The SIKO DE04 Programmable Position Indicator
The electronic position indicator DE04 can be used flexibly because of programmable display values and availability of three function keys. In difference to usual mechanical counters the battery-powered indicators from SIKO offer the following user benefits:
  • Display value and decimal point freely programmable
  • Selection between angle measurement and linear measurement
  • Reset function
  • Incremental function
  • Offset value programmable at the device
  • Higher shaft speed of 600 rpm
  • Users can configure the display values themselves by using the optional PC-based software ProToolDE.
    The DE04 is linked to the computer via a custom USB cable.

ADVANTAGE OVERVIEW
Features
  • large display (figure height 8 mm)
  • maximum hollow shaft diameter 16mm.
  • freely programmable via PC -> programming tool (optional accessory)
  • programme display for imperial, metric and angles
  • battery can be easily replaced
  • battery life 24 months
  • incremental measurement function, display of absolute value
  • easy mounting


updated March 2015
1.DE04-02-300-1-1-i-D-RH16-R-A-B2 ... [more details]
SIKO DE04 programmable digital indicator, for horizontal spindle, standard model, decimal point = 0000.0, display divisor = 1, cw increasing, without delay, with 16mm hollow shaft, red housing, cylindrical torque pin, 2 year battery service life

SIKO DE10 Series
The SIKO DE10 Programmable Position Indicator
The SIKO DE10 is very flexible because of the range of programmable features and availability of three function keys.
With respect to the usual mechanical counters, the battery-powered indicators from SIKO offer the following user benefits:
  • Display value and decimal point freely programmable
  • Selection between angle measurement and linear measurement.
  • Reset function
  • Incremental function
  • Offset value programmable at the device
  • Higher shaft speed of 600 rpm


The user can configure the display values by using the optional PC-based software ProTool DE. The position indicator is linked to the computer via a custom USB cable.
ADVANTAGE OVERVIEW
Features
  • large display (figure height 11.5 mm)
  • max. hollow shaft diameter 30mm
  • freely programmable via PC -> programming tool (optional accessory)
  • programme display for imperial, metric or angle measurement and
    compensate for minor errors in spindle thread pitch
  • battery can be easily replaced
  • battery life 24 months, (optionally 8 years)
  • incremental measurement function, display of absolute value
  • easy mounting

updated Nov 2012
1.ProTool DE ... [more details]
SIKO DE04 and DE10 programming software for PC with USB 2.0 interface.
2.DE10-02-...-1-1-i-D-RH30-R-A-B2 ... [more details]
SIKO DE10 digital indicator, for horizontal spindle, standard model, decimal point = 0000.0, display divisor = 1, cw increasing, without delay, with 30mm hollow shaft, Red housing, cylindrical torque pin, 2 year battery service life

SIKO DE10P Series
The SIKO DE10P User Programmable Position Indicator

A key advantage is the possibility of programming all parameters of the position indicator directly at the device. This enables a basic device to be individually adapted to the particular application without need of further accessories. All settings such as spindle pitch, reading position, counting direction and key function can be programmed directly via the key pad.
Advantage Overview
Features
  • Freely programmable directly via keys on the indicator
  • Hollow shaft max. Ř 30 mm
  • Hollow shaft made of stainless steel
  • 30mm & 20mm hollow shaft diameters standard
  • reducing sleeves available
  • LCD display with 6 digit and special characters
  • Digit height approx. 11 mm
  • Long battery service life
  • Easily exchangeable batteries (Standard AAA)
  • Incremental measurement function, display of absolute value
  • High protection category
1.DE10P-0001 ... [more details]
SIKO DE10P-30-O-S-IP65, DE10P, 30mm hollow shaft, orange body, Stainless Steel sleeve, IP65 sealing.

SIKO DKE01 series
The SIKO DKE01 Programmable Indicator and Hand wheel

In 1963, SIKO GmbH invented a mechanical position indicator integrated in a hand wheel – a product the field of mechanical engineering could hardly do without today. As inexpensive and easy-to-use gauges, SIKO hand wheels with integrated position displays reliably perform a variety of tasks ranging from roll positioning, aligning limit stops and tools, to manual metering settings.

The new DKE01 adjustment knob with LCD display combines the experience of nearly 50 years of positioning technology with the state-of-the art functionality of an electronic display. Because the display values are user-definable, it is possible to handle the most diverse of challenges with one flexible device. The managing of multiple types of devices, and therefore also keeping the parts required for them on-hand has become a thing of the past. Extra features such as allowance for offset values and a reset button for calibration expand the range of uses.

Thanks to a particularly energy-efficient measuring technique, the electronic DKE01 adjustment knob has a battery life of eight years. The power is supplied using a conventional coin battery, which can be easily replaced by the device user at the end of its service life. Last but not least, the DKE01 sports an impressive contemporary design, thus giving each machine that special je ne sais quoi.

ADVANTAGE OVERVIEW
Features
  • Electronic rotary knob with integrated LCD display, 5digits
  • Digit height approx. 11.5 mm
  • Freely programmable display values using the SIKO PROTool DE series software.
    Supports linear metric, imperial displacement. Build machines with one screw thread pitch and export to metric or imperial markets
  • Supports degree angle measurement.
  • For length or angle measurement push button offsets available
  • Shaft accommodation max. 20 mm
  • Long battery service life
  • With digital scales the read-out value does not vary with viewing angle making digital versions more useful than analogue version where scales are less precise over all view angles
  • Mounting by torque-pin, like DA indicators. Mounting compatible with SIKO DA09S and DE10
  • Protection class IP65

Nov 2012

DKE01-HS, An HS Hand wheel versions released.
Please use the Order Code Builder to create your requirements for quotation.
Nov 2013
1.DKE01-0001 ... [more details]
SIKO DKE01 programmable indicator and handwheel

SIKO Driveline Positioning
SIKO DriveLine compact actuators: Reduce setup times, enhance productivity.
Short cycle times and changeover times, high productivity and quality with lower capital expenditure. is the recipe for success of ideal industrial processes.
The DriveLine actuators of SIKO GmbH are particularly well suited for this purpose. Automatic format adjustment, stop positioning, tool alignment and valve adjustment as well as many other comparable positioning tasks: from a rotary actuator or actuator for simple applications and ancillary functions to a rotary drive and spindle drive or servo drive replacement for the control of complex machine processes and main processes, all of these tasks are easily mastered.
Easy integration and commissioning of the SIKO actuators.
Thanks to a variety of sizes and forms, the integration of the actuator, the sensor and the control technology in a compact housing, different interfaces and bus systems, professional mechanical engineering is supported effectively in the integration and commissioning of the systems. The hollow shaft is mounted by simply attaching and locking the drive shaft using a clamping ring (keyway is optional), also making flexible retrofitting of existing axes possible without the need for lengthy preparation for assembly and fastening with the corresponding couplings, adapters and covers.
SIKO positioning drives are at home in a variety of applications
Drives and actuators can be used in many production processes – both on individual machines or within whole production lines, for example in packaging technology, press technology, the wood, glass and printing industries, the plastics and textile industries as well as in tool construction and special machine construction.
Precise format changes are the strong point of our actuators.
Product change with parameters that vary substantially is an everyday occurrence and requires numerous adjustment procedures. In such cases, the exact reproducibility of each adjustment is just as important as performing tasks at difficult-to-access or dangerous positions. ±The flexibility in terms of changing production goods grows in line with increasing product quality.
Enhanced machine efficiency owing to compact actuators
Integration of the DriveLine actuators is simple, and the accelerating effect as well as a lasting increase in machine efficiency and operational safety can be measured immediately. Predestined are manufacturing chains where small batch sizes, frequent format change or varying product sizes are daily business.
Benefit from the decentralized and modular automation with DriveLine and enhance your competitiveness decisively. A wide range of different versions and performance categories permit flexible scaling. Implement your "bespoke" solutions – from the basic module through to high-end applications.
Benefits
  • Flexible machine conception, simple regulating behaviour
  • Low installation and mounting effort
  • High availability and freedom from maintenance
  • Short cycle or changeover time high productivity and quality

The following SIKO Publications provide a comprehensive review the functionality of the APxx Series, APxxS Series, AGxx fieldbus DriveLine Series and ETC5000 fieldbus standalone controller.
Siko also manufacture Analogue and Incremental DriveLine Actuators, which are available on indent.


SIKO FLYER for visual overview click here and open the Flyer
SIKO DriveLine catalogue (6.9mB)click here and open the DriveLine catalogue (6.9mB file)
1.ECT5000-7-IP65-S3/09-S ... [more details]
SIKO ETC5000 LCD touch control panel, 7in (177mm) diagonal display, IP65 front panel moisture protection, RS485 / SIKONETZ5 interface / protocol, standard software.
2.AG02-0166 ... [more details]
SIKO AG02-55,3-70W-M-KR/14-OD-LA-ABM-OMS-PB-SW
3.AG02-0092 ... [more details]
SIKO AG02-66.2-70W-M-KR/14-D-B-LA-ABM-0MS-S1/100-OFB-SW
4.AG03-0012 ... [more details]
SIKO-AG03-48-50W/M-IP50-KR/14-B-E12-ABM-OMS-PB-SW
5.AG05 Fieldbus-66-50W-IP54-KR/14-A-ABM-S3/09 ... [more details]
SIKO AG05 Fieldbus, gear ratio of 66, motor power of 50W, with IP54 moisture protection, ABM, with RS485 / SIKONETZ5
6.AG06 Fieldbus-188-50W-IP54-KR/20-B-ABM-S3/09-SW ... [more details]
SIKO AG06 Fieldbus, Gear Ratio i=188, Motor Power 50W, with IP54 moisture protection, B, ABM, with RS485 / SIKONETZ5, SW